Glove Tester
Glove Integrity Tester
Model: GLT-10
Description
Glove integrity tester is used to detect even tiny leak on the glove via the testing port, and according to Air Pressure decay leak testing
principle. It’s easy for manufacture and user to verify the integrity of gloves.
◆ Japanese technology: Confirm to international standard ISO14644-7.
◆ Diversified testing mode: Can be on-line testing (Need to match a glove fixing ring)
◆ Modularized function: can test more than one glove at the same time.
◆ High test pressure: maximum pressure to 5000 pa, tiny leak can be detected.
◆ Intelligent control interface, with the function of data Storage.
◆ Three test modes: quick test, normal test, precision test.
◆ This equipment meets the requirements of USA gloves-box gloves factory inspection standard.
|
Model |
GLT-10 |
|||
| Power Supply |
AC220V, 1Φ, 50Hz |
|||
| Rated Power |
100 w |
|||
|
Max. Testing Pressure |
5000 Pa |
|||
|
Working Environment |
Normal air conditioning clean room( Don't test in the environment of rapid changes in temperature) |
|||
|
Overall Dim. (WxDxH) |
500×400×1100 mm (19.7''x15.7''x43.3'') |
|||
| Weight | ~35 kg | |||
| Accessory |
Sealing device or Glove fixing ring( Both Optional) Note: Increase the number of sealing device or Glove fixing ring according to the number of tested gloves |
|||
|
Quick Test |
Get glove intergrity result in a short time |
|||
| Normal Test |
Test after glove internal pressure is stable, will get accurate result. |
|||
| Precision Test |
When unalbe to get result under Normal test, Mat use Precision test, with long time test, the results will be more accurate. |
|||